I would be interested in beta testing and giving input and reverse-engineering hardware, but I definitely lack the programming skill to achieve a nearly stable and usable port of openTX to this radio. This would be reason enough for me to buy the thing at least. At this point the hardest part should be done (remember, I have no idea how complex all the other required changes to the code might be) and others might become interested in testing and contributing to this port. Somebody with the required motivation and skills would have to write a display driver based on the gathered information. If this would be likely to happen is up to anybody's imaginationįirst step would be to find out which display is used and how it is driven, if this information is not available one would have to probe the display with a logic analyzer and reverse engineer the protocol. If hobbyking would flash these with openTX by default if it was available for this radio, this could spark some interest. The question asked is clearly not if porting openTX to the T SIX is possible, but if it is worth the effort. This might be tricky, depending on how well if at all the display protocol is documented, e.g. However given that the processor is already supported and the integrated DSM2 module might use the original X1TXN protocol that is already implemented in openTX aswell, the main challenge remaining to get at least started on the T SIX would be to write a driver for the LCD. I DO NOT have any useful programming expertise, I'm just confident enough with Arduinos and MSP430s to run some basic sketches and to configure / tweak my MultiWii pocket quad, so my input on this is only theoretical and probably quite naive. I don't want to spend the $65 + shipping + tax at the moment, but i might have a weak moment on a late evening browsing HK in the near future IMHO definately a better TX than the DX6i assuming that hardware sustains use (there has been reports about failing LCDs) and definately not a copy or clone of the DX6i.Īnyway, It's well usable with the original firmware and apparently there is no interest for porting so there is no reason to go further. Overall I was quite impressed build quality is better than I've seen on any FlySky TX but not quite level of the name brands, the LCD is by far the best I've seen on any cheap TX, roller type ecoder works nicely, the sticks were about as good as in my best 9x but not as good as Aurora or Futaba sticks and the software was ok for the foamies/small helis. I had a ORX T-Six here for a while before passing it to a local heli guy. The pin use is probably quite bit different and difficult/time consuming to reverse engineer though. Given that the ATMEGA 128 is already supported and directly related to ATMEGA 64, I don't think that porting requires as much work as was needed for completely new processor like in the case of the Sky9X/Taranis. Orange Rx quality is guaranteed.Looking at the effort required to properly port, debug and support the firmware to the Taranus and Sky9X boards. ![]() This is not an underground/black market fake Spektrum / Walkera product. This is not a Spektrum DSM2/X/ Walkera product, neither is it a copy of a Spektrum DSM2/X Walkera product. There are over 4 billion unique ID's assigned to Orange Rx modules. You must have JavaScript enabled in your browser to utilize the functionality of this website. JavaScript seems to be disabled in your browser. The OrangeRX DSMX DSM2 Compatible 2.4Ghz Transmitter Module V2.0 is JR/Turnigy/Taranis compatible. ![]() In case of binding issues with other branded receivers press the "Change ID" button on module to change the Module ID to another unique value reserved for that module (5 ID's assigned to each module). HobbyKing stocks a large range of quality OrangeRX products. The Orange RX 2.4Ghz Telemetry Module uses a unique Global ID for binding. Orange RX DSMX/DSM2/Walkera compatible 2.4Ghz transmitter module (JR/Turnigy compatible) Offer 5 operating modes: DSM2 1024/22ms, DSM2 2048/11ms, DSMX 22ms, DSMX 11ms, and Walkera ProtocolĬompatibility: Turnigy 9XR Pro / JR Transmitter Compatible.Standard JR/Turnigy compatible 5-pin connection.Simply replace your existing module with the Orange RX Telemetry Module and you are ready to bind to any DSMX/DSM2/Walkera compatible receiver. The Orange RX DSMX/DSM2/Walkera compatible 2.4Ghz Telemetry transmitter module offers a simple, convenient and inexpensive way to add telemetry and a selection of additional protocols to your 9XR Pro.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |